Start-Stop Switch

This switch is connected to the pulse input socket of the RS350. It is used to test electromechanical meters under low load conditions.
A scanning head needs about 2 full rotations of the meter disk for adjustment. With the Start-Stop switch you can monitor the mark on the disk. When it is in front, you press the button for starting the measurement. Once the mark arrives again at the front, press the button and see the error result.

start - stop switch
start – stop switch

Start-Stop Switch
Rate this post

Published by

Lao Ren

more than 30 years experience in energy metering Product Director Shenzhen CLOU Electronics